Disclaimer: This blog makes use of sponsored and/or affiliate links. Please see this page for more information.

Removable C2C (Bunny) Pillow Case - Free Crochet Pattern


Learn how to crochet an envelope style of C2C pillow case that you can easily remove for washing or change it every time you want.
This removable C2C pillow case design will be the base for all my Animal C2C pillow cases.

Removable C2C Bunny Pillow Case

*Disclaimer: This post includes affiliate links and at no additional cost to you, I might earn a small commission if you decide to purchase through these links. Thank you!
The yarn was provided by Red Heart Yarns.
Crochet Hook provided by Furls Crochet.

For the front side of the pillow case, you can choose any of my Animal C2C Square patterns (at the time available the Sassy Bunny and the Woolly Sheep). You could also make a plain C2C Square of 26 x26 tiles.

Removable C2C Bunny Pillow Case

The Sassy Bunny Pillow Case would be great to decorate your couches and chairs for Easter, but also to decorate a baby's/child's room!

For the back side you will work 2 rectangles of different sizes:
- one panel of 26 tiles x 10 tiles (R1)
- one panel of 26 tiles x 20 tiles (R2).

SUPPLIES (for the Back Panels):
- 200 g of Red Heart Super Saver - I have used Red Heart Ombre Deep Teal)
- 5.5 mm crochet hook (shown here my Furls Wooden Hook, Cocobolo)
- Tapestry needle
- Scissors
- 3 wooden buttons of 30 mm

SIZE: fits a 16 inches X 16 inches square pillow

STITCHES AND ABBREVIATIONS (US Terms):
- ch: chain
- slst: slip stitch
- ch2sp: chain two space
- ch3sp: chain 3 space
- st: stitch
- sc: single crochet
- hdc: half double crochet
- RS: right side
- WS: wrong side
- beg: beginning
- sk: skip
- rep: repeat
- yo: yarn over
- R1- rectangle 26 x 10 tiles
- R2 - rectangle 26 x 20 tiles

Removable C2C Bunny Pillow Case


Removable C2C Pillow Cover

~ Add this pattern to your Ravelry Queues and Favorites! ~

~ Pin it here! ~

INSTRUCTIONS:

The same as the square front panel, the 2 rectangular back panels are worked with the Corner to Corner (C2C) technique using the hdc (half double crochet) stitch.
You will work each piece on the diagonal starting from bottom right corner to top left.

How to Crochet a C2C Rectangle with the hdc

If you have never worked a C2C Rectangle/ Square in hdc, I would recommend you to watch the video tutorial embedded at the end of the instructions below.

Row 1: Start with ch5. Work 1hdc in 3rd ch from hook and 1 hdc in each of next 2 ch. (The 2 skipped chains at beg of row will be a ch2sp).
You made the First and only Box Stitch of row 1!

From now on, you’ll start increasing 1 box st in each row.

Row 2: Turn your work, ch 5, turn, work 1 hdc in 3rd ch from hook and 1 hdc in each of next 2 ch. (1st. box st of the 2nd row made).

Turn your work, sk all 3 hdc of next box st, slst into ch2sp of that box st, ch2, work 3 hdc in same ch2sp. ( 2nd. Box st of the 2nd row made!)

Row 3: Turn your work, ch 5, turn, work 1 hdc in 3rd ch from hook and 1 hdc in each of next 2 ch. (1st. box st of the 3rd. row made)

Turn your work,
*sk all 3 hdc of next box st and slst into the ch2sp at left of that box st, ch 2, work 3 hdc in same ch2sp . (2nd. Box st of the 3rd row made); rep from * for the next box st (3rd. Box st of the 3rd row made).

Continue increasing by 1 tile per diagonal row until you reach the Corner by row 10 for R1 and by row 20 for R2. (See the highlighted diagonal row in the graphs below!)

Removable C2C Bunny Pillow Case

After corner you’ll start decreasing (see instruction below!) on one side of the row (top side in graph) and increasing on the other side (at bottom of graph) to keep the total number of
- 10 tiles per row for R1
- 20 tiles per row for R2
until you reach row 26.

After that you will only decrease each row until you get to 1 box st by last row.

How to Decrease Box Stitch/ Corner to Corner (C2C) in Half Double Crochet

Turn your work. Do not chain 5 anymore.
sl st loosely into top of each hdc of the last box stitch made in the previous row, then slst into next ch2sp of last box st from previous row, ch 2, work 3 hdc into same ch2sp.

Watch Maria’s Video below to learn How to Crochet Half Double Crochet Corner to Corner Rectangle:

Here are my 3 C2C pieces (the front panel and the 2 back panels):

Now you will crochet a Buttonhole Band for R1.

Row 1: Join yarn with a standing sc into the right upper corner of R1 and work 56 sc evenly spaced along the long edge; turn (57 sts total)

Row 2: ch1, sc in each sc across; turn (57 sts)

Row 3: ch1, (1 sc in each of next 12 sc, ch3, sk next 3 sc) x 3 times, 1 sc in each of the next 12 sc; turn.

You have made 3 buttonholes!

Row 4: ch1, (1 sc in each of next 12 sc, 3 sc into ch3sp) x 3 times, 1 sc in each of next 12 sc; turn. (57 sts)

Row 5: ch1, 1 sc in each sc across. (57 sts)

Cut yarn. Fasten off.

Sc Edging on the upper edge of R2: Join yarn with a standing sc into the right upper corner of R2 and work sc evenly spaced along the long edge.
Cut yarn. Fasten off.

Assembling the front and back panels together:
The 3 pieces will be sandwiched and sewn together using the Mattress Stitch .
The back pieces will overlap, creating the envelope type of pillow cover.

Sandwich the 3 pieces with the right sides facing together:
First lay down the Bunny (other animal square in my series) with the RS facing you, then place the rectangle with the buttonhole band down over it and pin the top corners together, as in the picture below.

Now place the larger back panel (with the sc edging on top) so that the bottom corners are on top of each other. The back panels will overlap approx. 7 inches (18 cm) creating the envelope. Pin down and sew the 3 pieces together around the outer edges.
Cut yarn. Fasten off.

Removable C2C Bunny Pillow Case

Once you are done, turn the pillow cover right side out. You can now stuff your pillow into the cover through the back that is open.
Sew the buttons in place.

Removable C2C Pillow Case

I hope you enjoy this pattern! For more free crochet patterns and tutorials, please visit my FREE Crochet Pattern Page!

Many thanks to Red Heart Yarns for providing the yarns used for this pattern!

Don't miss out new free crochet patterns, tutorials and other updates from My Hobby is Crochet! Subscribe to our FREE Newsletter and follow My Hobby is Crochet on Facebook, Pinterest , Bloglovin , Google+, Instagram and Twitter.


Removable C2C Pillow Cover
Written Instructions and Pictures - Copyright © 2019 Kinga Erdem

This pattern is free for your personal use, you can sell the products of your work, a link back to my blog would be appreciated.
Do not use my photos for selling purposes or modify them in any way.
Please don't repost the pattern itself to any other sites, but please share the link to the pattern if you want to share the pattern with your friends.
You may not give away copies of this pattern.
Do not make video tutorials or translate my pattern in other languages without my written consent!
Thank you.
Kinga

12 comments:

  1. Você realmente faz parecer tão fácil com a sua apresentação,
    mas eu acho isso tópico ser na verdade algo que eu acho que
    eu nunca entenderia. Parece-me demasiado complexo e
    extremamente amplo para mim. Eu sou ansioso pelo seu próximo post, eu
    vou tentar pegar o jeito!

    ReplyDelete
  2. Hi, could you tell me what is the size of your pillow? Thanks

    ReplyDelete
  3. If I need a 24x24 about how many rows should I add? Thanks!

    ReplyDelete
    Replies
    1. Hi Val, are you making a plain pillow case, without any graph for the front? If yes, make a gauge swatch and see how many c2c boxes/tiles are in 4 inches and then calculate how many tiles with you gauge would be needed in 24 inch. With my gauge I would say 38 tiles x 38 tiles square for the front side, maybe 39 x39. So after row 38 or 39 start decreasing for the square.

      Delete
  4. Thank you! Yes it will be plain. I will do a gauge and go from there.

    ReplyDelete
  5. I am trying to make this for a 14x14 pillow but I am struggling with downsizing. I managed to figure out the square size (21 tiles by 21 tiles for my gauge), but I don't understand how big the rectangles should be..please help?

    ReplyDelete
  6. When the front of the pillow is done should I block the square or should I just sc around to the end.

    ReplyDelete
    Replies
    1. I have not blocked it. You could do it, if you like.

      Delete